Smart Mig 200 Amp Gas & Gasless Inverter Welder with Built-In Wire Feeder

• High duty cycle, low energy consumption.
• Gas & Gasless Mig Welding
• Comes with gas cylinder rack and wheels for easy portability
• Advanced high quality Toshiba Japan inverter technology
• Stable Arc allowing easy operation with a beautiful weld result
• High welding speed and intensity with complete efficiency
• Deep weld pools with almost no spatter
• Light weight design and low noise output
• Built in Electronic wire Sharpening
• Euro connection Mig Torch
• Adjustable Welding current from 50-200amps
• Digital Amp & Voltage meter for precision required applications
• Continuous operation without interruption even at high Amperage
• Suitable for welding thick plates with thickness over 0.8mm
• Generator Safe and Friendly
• Safety circuit prevents overheating,overcurrent,& over/under voltage
• Uses 200mm 5kg spools or 300mm 15kg spools
• Welds steel, stainless steel, copper, iron, brass,titanium& other metals

        What's Included:

        Inverter Welder
        Binzel Mig Torch and Lead
        Earth Clamp and lead
        Flowmeter Regulator
        Gas Hose and clamps
        Leather Welding Gloves
        Spare Contact Tips
        Owner's Manual 
 

Input power voltage frequency (V/Hz)
AC240V(single phase)
50/60Hz

Rate input power capacity KVA
6.4

Current range (A)
50-200

Rated output voltage (V)
24

Rated duty cycle (%)
60

Efficiency (%)
85

Power factor
0.85

Insulation class
F

Protection class
IP21

Weight (KG)
32

Dimensions (Cm)
57x29x52

Feeding speed (m/min)
2-15

Wire Feeder
Built-In

Diameter of spool (mm)
200-300

Diameter of welding wire (mm)
0.6/0.8/1.0/1.2